Results 1 to 6 of 6

Thread: Tolly parts

  1. #1
    Join Date
    Aug 2011
    Location
    Aurora, OH
    Posts
    13

    Tolly parts

    I have a 1987 40' Sundeck that I have been restoring over the last several years. Until now I used Gordon Graham at http://wwwtollycraftparts.com for specific Tolly parts such as gel coat, louvers, etc. I just found out that he shut down 10/01/18 and there is no forwarding information on the phone message. Does anyone know where I can access a supply of Tolly specific parts and supplies?
    Thanks,
    Lynn
    216 577 6922

  2. #2
    Join Date
    Jul 2009
    Location
    Coquitlam BC
    Posts
    24
    Quote Originally Posted by captofc View Post
    I have a 1987 40' Sundeck that I have been restoring over the last several years. Until now I used Gordon Graham at http://wwwtollycraftparts.com for specific Tolly parts such as gel coat, louvers, etc. I just found out that he shut down 10/01/18 and there is no forwarding information on the phone message. Does anyone know where I can access a supply of Tolly specific parts and supplies?
    I cant help you with information about Gordon Graham but have the same model and year and have done a number of updates over the years Perhaps I can provide some suggestions or point you in the right direction?

  3. #3
    Join Date
    Aug 2011
    Location
    Aurora, OH
    Posts
    13
    Quote Originally Posted by Phil Ballard View Post
    I cant help you with information about Gordon Graham but have the same model and year and have done a number of updates over the years Perhaps I can provide some suggestions or point you in the right direction?
    I would be grateful for any info. I have had the Sundeck for 10 years now and have restored/rebuilt/ replaced most items from the core of the heads to the wiring, most of the plumbing, a transmission, holding tank and the galley configuration. She looks great ... not Bristol but we want her to be usable. Right now I am looking for the original gel coat because of the color. I got a pint from Graham about 6 years ago but what I did not use then hardened and I need to fill some chipped places. I also cold use a 10 louver engine room air vent. The 2 I have are ok but look a bit tired. Again, any info would be appreciated.
    Thanks,
    Lynn
    216 577 6922

  4. #4
    Join Date
    Mar 2008
    Location
    Sacramento, CA
    Posts
    26
    Try https://spectrumcolor-com.3dcartstores.com/ I have used their gel coat patch on my 1983 26 thru 2 bottles over 14 years.
    LaNina
    1983 26' Sedan Cruiser

  5. #5
    Join Date
    Nov 2014
    Location
    Beaufort, SC
    Posts
    96
    Quote Originally Posted by LaNina View Post
    Try https://spectrumcolor-com.3dcartstores.com/ I have used their gel coat patch on my 1983 26 thru 2 bottles over 14 years.
    +1 on Spectrum for gel coat and patch kits. I've used their patch paste repair kit. Their Tollycraft off white is a great match even for my 44's 1986 hull. You'd be hard pressed to find the repairs until they're pointed out.
    I've used there gel coat by the quart to redo my 1977 15' Whaler hull and that looked great as well.

    Todd Olason of Viking Bay Enterprises has stainless engine vents. I think he has a made a few that will fit some Tollys. http://www.vikingbay.co/products---marine-accessories

    I see you've replaced your holding tank. If yours is in the forward V-berth compartment like mine, I'm curious how you got it out and did you relocate new tank somewhere else?
    Last edited by EBlocker; 02-07-2019 at 06:54 PM.

  6. #6
    Join Date
    Jul 2009
    Location
    Coquitlam BC
    Posts
    24
    Quote Originally Posted by captofc View Post
    I would be grateful for any info. I have had the Sundeck for 10 years now and have restored/rebuilt/ replaced most items from the core of the heads to the wiring, most of the plumbing, a transmission, holding tank and the galley configuration. She looks great ... not Bristol but we want her to be usable. Right now I am looking for the original gel coat because of the color. I got a pint from Graham about 6 years ago but what I did not use then hardened and I need to fill some chipped places. I also cold use a 10 louver engine room air vent. The 2 I have are ok but look a bit tired. Again, any info would be appreciated.
    I too have had my Tolly for about 10 years. Replaced fridge, stove, master head, hot water tank, inverter/charger, salon carpet, salon furniture, galley flooring, canvas, switched lights to LED, exhaust risers, oil coolers PLUS 2 major insurance claims totaling more than the value of the boat!

    Exhausted thinking about and listing all the work (and cost) but it has been a "hobby" that has kept me from getting bored..

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •